RCM-BK6MJ is Richmor 4th generation professional AI -powered DMS design dashcam . This camera design is much better fitted (100%)front windscreen installation without reflection than the traditional 2/3 fitted design. Support remote controller, USB Mouse, Moble APP,CMS remotely.
Main Features
1.H.265/H.264 hardware compression, powerful AI processor, with neuronal logic reasoning engine, support for deep learning algorithms.
2.Integrated DMS camera, can expand 1 AI camera input. Support DSM and environmental monitoring.
3.DMS camera driving behavior analysis——It can connect the DMS camera to give alarm warning and upload to the monitoring center for dangerous driving behaviors of drivers, including: fatigue (closing eyes, yawning), distraction, smoking, talking on the phone, etc
4.Driver face recognition function——Face recognition attendance on the basis of management can also prevent the driver illegal substitution, non-compliance of the driver operation of the problem, standardize the driver and operation management.
5.Beidou /GPS positioning, support the ministry of JT/T808, JT/T1076, JT/T905, Geely, Su Biao and other platforms to report transmission.
More Details
1.Integrated WIFI module, support AP and STATION mode. In AP mode, you can use the operation and maintenance APP connection for debugging and maintenance.
2.8V~36V adaptive wide voltage input, ultra-low power consumption. Supports reverse connection protection and overload protection. Supports 12V power output.
3.Professional and reliable file system to ensure the accuracy and stability of video data and storage media.
4.TF card storage is supported. A single card supports a maximum of 512 GB. Support for hot swap.
5.4CH alarm input, 1CH RS232. Support extended serial port, external acousto-optic alarm or LED light screen.
6.Integrated WIFI module, support AP and STATION mode. The mobile APP can be used for quick setting and operation and maintenance .
7.Support TTS voice function, can achieve English and Chinese TTS scheduling broadcast.
8.Support alarm button emergency alarm trigger snap pictures
9.Delay shutdown function, delay time can be set.
10.It can realize ultra-low power sleep and continue to report the location. Keep position updated.
11.The professional platform software can realize the remote monitoring and management function of computer and mobile phone.
12.Optional side-mounted camera can realize DMS function or in-car monitoring function. The Angle of the side-mounted camera can be adjusted horizontally to support movement.
13.Ultra-low power consumption design, less heat, fast start!
Parameter
Operating System | Linux |
Network Type | 4G TDD-LTE, FDD-LTE/3G |
Memory | 2GB |
Integrated camera | HD 720P camera (DSM is infrared black and white camera) |
Other cameras (external) | HD 720P camera |
GPS |
Dual-mode positioning, support GPS+ Beidou, Positioning accuracy ≤10m(95% probability) Positioning time: hot starting ≤5s, cold starting ≤45s |
WiFi(optional) | 2.4G;IEEE 802.11b/g/n |
Speakers | 8 euro 1W, voice cavity |
MIC | Single wheat supports echo and noise cancellation |
G-sensor | 3 axle Gravity acceleration sensor |
Loop noise | Compatible with hardware loop noise elimination |
Module band |
UMTS:850/900/1900/2100MHz HSUPA/HSDPA:850/1900/2100MHz GSM/GPRS/EDGE:850/900/1800/1900MHz |
Module type |
Support built-in 3G/4G wireless transmission function TDD-LTE, FDD-LTE |
Support agreement | Support UDP,TCP/IP protocol |
Voice serve | HR/FR/EFR and AMR |
HR/FR/EFR and AMR | SMS |
Picture From Fleet Management